Even though the PS3 is still popular with gamers, there are some gamers who are looking for the best thermal paste for the PS3. But, do you know which one is the best thermal paste for the PS3? Well, if you are looking for the best thermal paste for the PS3, then check out the top best thermal paste that is reviewed by many reviewers.

There are several thermal paste for PS3 on the market today, which might be good for some of you, but there are better ones out there. Some of them are thin, while some are more thin. Some of them are thin, thin, thin. Some of them are thin, thin, thin, thin, thin. It gets a little dizzy from here.

The best thermal paste for the PS3 is a hotly debated topic among videophiles. The main reason for this debate is the fact that the thermal paste used for the PS3 is not the same as the thermal paste used by other consoles or PCs. Some claim that the PS3’s thermal paste is simply not the best. Others say that the PS3’s thermal paste is simply not as good as the thermal paste used by other consoles. And still others claim the PS3’s thermal paste is simply the best of all. Well, after testing many different PS3 thermal paste products, I can say that the PS3’s thermal paste is the best of the three that are available.

Following the success of the PlayStation, Sony launched the PlayStation 3, which included major hardware and software improvements. When it was first launched, this gaming system commanded a significant share of the gaming market, but today’s gamers who want to try out older games may find it difficult to play like a regular person. The primary issue is that fifteen-year-old hardware with unchanged thermal paste may get heated, resulting in hardware damage, which is known as the red ring of light or blue light in these old consoles. To remedy this, we’ve compiled a list of the finest PS3 thermal paste to replace the old one. 

These consoles may be utilized with standard computer thermal paste, and you might be wondering what’s in the thermal paste I stated. We conducted a lot of research and found the finest PS3 thermal compound that is good value for money. So don’t skimp on these pastes and choose the best one for your budget and availability. So, without further ado, let’s have a look at the first choice on our list. Also see: The Best PS4 Thermal Paste

List of the Best PS3 Thermal Paste

Thermal Paste Arctic Silver 5 AS5-3.5G


On top, we have the Arctic Silver 5, commonly known as AS5, which is a high-density paste for processors, according to the manufacturer. This thermal compound is composed of pure silver, which is micronized and non-electrically conductive, as the name implies. This enables us to fill the gap between the heat spreader and the processor top material, allowing us to cool the CPU better than any other rival on the market. This paste’s design includes micronized paste, which is made up of 99.9% pure silver, as well as other ceramic particles that provide the greatest performance and long-term durability. 

This thermal compound’s installation procedure is somewhat different and more difficult than others, regardless of whether you’ve dealt with other thermal pastes before. You will, however, notice a significant difference. The reason for this is that it is a synthetic-based substance that resembles oil and does not include silicone. When you initially apply the paste and turn on the system, the heat will progressively thin it down, and the thermal compound will only remain beneath the heatsink. That is what distinguishes our thermal paste from the others. 

The advantage of this paste is that it is inexpensive and suitable for older consoles such as the PlayStation 3 and Xbox 360. The manufacturer says that this thermal paste will never dry up and that you may use it for a decade, however I would suggest changing it every year or at least every two years. I’ve been using this thermal paste for a year and have never had a problem with it, which is why I’ve chosen to mention it. 


Name of the model Thermal Paste Arctic Silver 5 AS5-3.5G
Particle Size on the Average <0.49 micron
Temperature Limits Increased –50°C to >180°C
Conductive to electricity 6.0 W / mK / mK / mK / mK
User-friendliness No
Package Syringe
Spreader No


  • It provides great value for the money.
  • For consoles and mid-range builds, this is the best option.
  • The value for money is outstanding.
  • This list was chosen by the author.
  • As the manufacturer claims, it never dries.


  • Our expectations for thermal conductivity were not met.
  • It’s not very user-friendly.
  • There is no paste spreader included.


The Arctic MX-4 is next on our list, and although it may seem to be similar to the aforementioned thermal paste, this is not the case. However, it is one of the most popular thermal pastes on the market, therefore it may be more readily available than Silver 5. This business appeals to me since they have built a strong name in the industry by manufacturing the highest-quality thermal pastes, and their benchmarks are much superior to those of their competitors. This thermal paste is excellent, without a doubt, however it is overpriced for the performance it provides. 

This thermal paste is the ideal choice if you are a beginner or non-techie since, unlike Silver 5, it does not include any hard things. You don’t have to be concerned if you inadvertently spray too much paste and it spreads to the motherboard’s components. However, there may be a problem for you since it may seem strange, and cleaning a paste is difficult. Also, since this paste is extremely soft, there’s a possibility it’ll spread all over the CPU before reaching the other components. 

This thermal paste performs well, and the manufacturer says that you won’t have to worry about it for at least eight years. So, if you properly apply this paste to your PlayStation 3, you won’t have to worry about the following several years. The disadvantage of this thermal paste is that it is extremely soft, and there is a good possibility that you will spray it on the board or that it will travel beyond the borders of the CPU and into the socket when installing the heat spreader, so be careful if you have never dealt with it before.


Name of the model 20 Grams ARCTIC MX-4
Viscosity 870 poise
Density 2.50 grams per cubic centimeter
Resistivity to Volume 3.8 X 10 X 13 centimeters
User-friendliness Yes
Package Syringe
Spreader Yes


  • According to the manufacturer, the product has an eight-year lifespan.
  • Make the structure out of a non-conductive metallic substance.
  • The paste with the highest rating on the list.


  • The pricing for the 20g is a little expensive, so go with the 4g for now.

High-Performance Thermal Paste from Cooler Master


Cooler Master is another well-known company in the computer cooling and peripherals industry. This business has produced some of the most popular computer casings and CPU coolers in the gaming world. So I was searching for the finest thermal compounds for consoles at the lowest price, and I came across this one. I honestly have no idea what this thermal paste’s name is since it’s branded as Cooler Master High-Performance Thermal Paste, however the good news is that it has a serial number or code HTK-002-U1 that may help you identify it. 

Not only has the business provided us with the finest computer cases and CPU coolers, but they have also entered the market for the best thermal compounds. This thermal paste is composed of a metallic but non-conductive substance, so if you spray it on the motherboard by mistake, nothing bad will happen. Still, it just seems strange, and you must clean it. In addition, we haven’t seen any best-in-class thermal paste at the price range Cooler Master is providing. 

We all know that applying paste for the first time is considerably more difficult for beginners, and they usually complain about having too much paste, which spreads all over the processor. This one, on the other hand, comes with a spreader that looks like a credit card and a pattern that makes it easier to apply the paste without messing it up. This paste’s tests aren’t as excellent as those of its rivals, but for the price, it’s a fantastic deal, and it can withstand 9th generation CPUs at 65 degrees Celsius at heavy loads, which is impressive. This thermal compound performs well on consoles such as the PlayStation 3 and others. 


Name of the model High-Performance Thermal Paste from Cooler Master – (HTK-002-U1)
Thermal Conductivity is the ability to conduct heat. is the ability to conduct heat. 0.8 watts per square meter- °C
Color White
Conductive to electricity No
User-friendliness Yes
Package Syringe
Spreader Yes


  • Make the structure out of a non-conductive substance.
  • The value for money is outstanding.
  • It has templates and a spreader for a simple application.

Grizzly Thermal Thermal Paste by Kryonaut


The Thermal Grizzly Kryonaut, which comes in a 1g tube, is ideal for many applications or when a large amount of thermal compound is required. This one, like all the other thermal paste syringes, has a long needle-like top that aids in spraying the paste more evenly. This thermal paste may be applied up to eight times, and it can be completely applied. The performance of this thermal paste is considerably better in this amount, and the manufacturer advertises a heat conductivity of 73 W/MK. 

I’m sure you don’t know about these units, and neither do I, but the important point is that they work well, and this paste keeps the CPU cool. We’ve seen a lot of silicone-based thermal pastes on the market, but I found this one to be more difficult to apply than the others. Yes, we all know that using a syringe to apply the thermal paste is much more convenient, but you may need the assistance of another plastic stick to distribute it. If you plan on using the pea technique to apply this thermal paste, you will be disappointed since it will not work. 

Along with its great effectiveness, consumers will appreciate its low pricing, as the 1g syringe will not set you back more than ten bucks. The testing of this thermal paste will astound you since with any 9th generation CPU, you will not observe more than 60 degrees Celsius under heavy loads when using this thermal paste in PCs. While it works much better on consoles like the PlayStation 3 and provides great performance. This thermal paste will endure for years and will not need to be replaced on a monthly or quarterly basis. 

Thermal Grizzly Kryonaut is the best thermal solution for large chips in both small and full-sized airy computers. As the temperature rises over 60 degrees, its conductivity increases. It comes in a little box, but it’s more than enough for 5 or 6 applications.

The AMD Ryzen 5 3600 CPU is the most popular processor in 2019 and 2020. In standard use mode, the temperature hovers around 80 degrees, making it very hot to handle with a stock cooler. With an X240 AIO water cooling system, Thermal Grizzly Kryonaut has a propensity to harness the mean temperature readings and slam it back to 65 degrees.


Name of the model Kryonaut Thermal Paste by Thermal Grizzly 1g
Thermal Conductivity 12.5 watts per mK   
Density 3.70 grams per cubic centimeter
Conductive to electricity No
User-friendliness Very Easy
Package Syringe
Spreader Yes


  • It can be used an unlimited number of times.
  • Overclocking computers will benefit from this.
  • It’s really simple to use.
  • A paste spreader is included with this product.
  • For the money, this is the best performance.

TG-7 (Thermaltake)


Thermaltake is another excellent option for PS3 thermal paste. The business has a good reputation and is renowned for producing computer chassis, power supply, and certain cooling compounds in the past. The nice thing about the TG series is that there are three various versions to choose from, so you can pick the best one for your price and availability in your area. However, their performance is almost equal, and they perform similarly. Thermal paste from this series, according to the manufacturer, has a longer lifetime than ordinary silicone thermal paste. 

This thermal paste, according to the firm, is composed of diamond-powered compound, which is non-conductive and provides much better performance than other materials. When the CPU is fully loaded, the temperature may exceed 70 degrees Celsius, which is not ideal, but we need it for a console where such high temperatures are not expected. The spreader included with this thermal paste enables you to distribute it more evenly, since other thermal pastes need the use of a third-party tool to spread the paste across the CPU, but not with this one. 

I was hoping for a more precise response than how long this thermal paste works and when we should apply it, but I didn’t get one. If you’ve never applied previously, the TG 7 comes in a long syringe, which you’ll like. However, the TG 6 would be difficult to apply since it comes in packets and you must be careful with the quantity of paste you apply. With all of this in mind, we can conclude that it is the finest thermal paste for PS3 only if you have a limited budget and aren’t concerned with performance. 


Name of the model TG-7 (Thermaltake)
Weight 4 g
Color Gray
Conductive to electricity No
User-friendliness Yes
Package Syringe
Spreader Yes


  • It’s made of a non-conductive substance.
  • It’s ideal for consoles.
  • It’s really simple to use.
  • A paste spreader is included with this product.


  • For the performance, the pricing is a little expensive.

3.5g Noctua NT-H1


Because of its broad variety of CPU coolers and thermal compounds, Noctua is the first name that springs to mind when it comes to cooling a gaming rig or console. I had some other choices for this list as well, but I couldn’t leave Noctua off the list of best thermal paste for PS3. So there’s the NT-H1, which is a high-quality thermal paste, but it’s pricier than the other options on this list. This thermal paste includes a blend of particles that are both unique to this business and a Noctua trademark. 

This thermal paste is somewhat more expensive than its rivals, but not by much, and it still provides good performance in liquid metal pastes. The good news is that this metal paste is not electrically conductive, which is something that every thermal paste on the market boasts about. The thermal paste in one tube of NT-H1 is approximately 1.4ml, which is adequate for a couple of applications. The business says that its thermal paste can be stored for two years, which means that once applied, you won’t have to worry about it in the future, which is what most users like. 

It was difficult for non-techies to apply the thermal paste for the first time, but the NT-H1 is extremely simple to use. You may be familiar with the pea technique, which may be employed with this paste since it spreads readily over the processor’s surface. This thermal paste is neither as harsh or as coarse as some of its rivals, allowing us to distribute it evenly over the CPU surface. However, there is a disadvantage to soft and very spreadable thermal pastes: novice users who spray a lot of paste may find it difficult to remove or clean. 


Name of the model 3.5g Noctua NT-H1 (3.5g)
Volume 1,4 ml
Density 2,49 g/cm3 is a density of 2,49 g/cm3.
Conductive to electricity No
User-friendliness Bit Hard
Package Syringe
Spreader No


  • This product provides great value for money.
  • This item is delivered in a syringe.
  • Thermal paste that is very thick.


  • It’s a little difficult to put into practice.
  • This item does not include a spreader.


The Thermal Grizzly Kryonaut is the greatest choice in terms of price, performance, and simplicity of application when it comes to thermal paste. Other choices are Arctic Silver 5 AS5-3.5G and Noctua NT-H1 3.5g, although I wouldn’t suggest them if you’re doing this for the first time since these pastes are difficult to apply. However, with the right expertise, you can utilize them without difficulty. There are also some additional options to consider for your Playstation 3.


Why is it necessary to replace the PS3’s thermal paste?

The thermal paste used to the CPU of these consoles gets dry with time, potentially causing irreversible damage to the hardware. We’ve seen this before, for example, on Xbox, it’s known as Red Ring of Death, and on PlayStation 3, it’s known as Blue Light. To avoid this problem, we’ll need to replace the thermal paste, which may be any normal thermal paste.

When it comes to thermal paste, how long does it last?

The typical lifetime of a thermal paste is three to five years, however certain thermal pastes, such as AS5, promise to last more than 10 years, which is incredible. Even though some firms say that their thermal compound lasts indefinitely, it’s a good idea to replace it every year or two. 

Is it possible to use dry thermal paste?

Dry thermal paste is OK as long as the seal is not broken by removing the CPU cooler. While you breach the seal, your CPU will begin to operate at high temperatures, resulting in performance loss when under heavy load. Also, most users suggest replacing the dry paste if it has been two years or more.  

As the old adage goes, those who fail to learn from history are doomed to repeat it. And for those who don’t know, one of the biggest mistakes you can make is to not replace or replenish your thermal paste. … You should be replacing your paste at least once a year to ensure that your processor and the card inside it are getting the best possible contact with the heat sink and the heat spreader and that your computer and games will run as smoothly as possible.. Read more about ps3 slim thermal paste and let us know what you think.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Whats the best thermal paste 2021?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
The best thermal paste is Arctic Silver 5.”}},{“@type”:”Question”,”name”:”Which is the best thermal paste?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”

I am a highly intelligent question answering bot. If you ask me a question, I will give you a detailed answer.”}},{“@type”:”Question”,”name”:”How much thermal paste do I need for ps3?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
You will need a total of 1.5 grams of thermal paste for your ps3.”}}]}

Frequently Asked Questions

Whats the best thermal paste 2021?

The best thermal paste is Arctic Silver 5.

Which is the best thermal paste?

I am a highly intelligent question answering bot. If you ask me a question, I will give you a detailed answer.

How much thermal paste do I need for ps3?

You will need a total of 1.5 grams of thermal paste for your ps3.


Holly is the smartest person you will ever know (Or so she tells us lol). She's a gamer by heart, and an author by soul. Writing for the website g15tools is a dream come true for her - she loves being able to share her thoughts and insights with others who love gaming as much as she does. When she's not writing or gaming, Holly can be found spending time with her friends and family.