Since the release of the AMD Ryzen 7 3700X Quad-core processor, there have been a number of new motherboards released with the X470 chipset. These are designed to offer more performance potential than the X370 chipset, using the same AM4 socket. Some of these new boards are quite good, but are aimed at the DIY enthusiast that wants to design their own PC. With that in mind, here are 9 of the best Mini ITX cases for the AMD chipset.
Mini ITX cases are very popular among computer builders, there are also some nice compact cases for mini ITX motherboards, but if you are looking for a nice compact mini ITX case that can house a nice mini ITX motherboard, then you have come to the right place. There are various cases to choose from, but if you are looking for a budget case that is also compact, then here are the best ones available.
Ever wanted to build your own gaming PC but didn’t want to invest in tons of expensive hardware? Then you’re probably looking for a cheap and easy way to build a mini-ITX gaming PC. A great case to go with, which you’ll not only want to protect your build, but also make it look pretty, is a case with a window. A windowed case can allow you to show off your gaming PC and will look great on your desk.. Read more about best mini itx case 2021 and let us know what you think.
Even though it may take a long time, building a gaming PC from the ground up is always a superior choice. I recall constructing my setup in 2018, and the impressions it left are immeasurable. At the end of the day, it always turns out to be wonderful because your efforts eventually bear fruit.
No, I’m not here to speak about irrelevant topics; instead, I’m here to highlight the most crucial aspect of constructing a gaming PC: the casing! Why do you think that is? … Because it’s one of the primary features that shows off your PC’s attractiveness to the rest of the world. Not to mention that the cable management, RGB fans, and the amount of space you receive are all dependent on the case.
As a result, today I’ll go through the finest tiny ITX cases (the smallest) for people who want to construct a PC with mobility as one of the main considerations. So, without further ado, let’s get started!
There are 9 best mini ITX cases in this list.
H200i NZXT (best all-rounder mini ITX case)
For a variety of reasons, the NZXT H200i is at the top of the list. It’s no surprise that it’s an all-rounder when it comes to air circulation. The NZXT H200i, on the other hand, is on the more costly end of the spectrum owing to the materials utilized in its manufacture. Furthermore, there is more than enough room to recline in a multitude of components; in other words, there is enough of clearance at one’s end.
According to the statistics, the case can comfortably accommodate GPUs up to 12.8 inches in length, as well as coolers up to 6.5 inches in length. You must pay close attention to the area of the parts you are purchasing.
Do not make the mistake of purchasing a bigger GPU or cooler that will not fit in the case. Because the RTX series GPUs are very long and big, they can simply be slotted in.
The tempered glass side panel’s only purpose is to improve the PC’s appearance and provide additional aesthetics for immediate appeal. Furthermore, the casing dominates the RGB lighting control panel as well as a slew of additional trays for dust and hard drives. In summary, it’s a must-have case for people who want tempered glass with a minimalist design.
Specifications
- a total of four supporters
- It is available in four distinct hues.
- GPUs up to 12.8″ long may be accommodated.
- Cable go-through location
- Coolers with a length of up to 6.5″
- Panel with a glass side
NR200 Cooler Master (The best Mini ITX case)
There is no better choice than the MasterBox NR200 if you want to install up to three GPUs in a Mini ITX form factor. For what it’s worth, this incredible entry surpasses the requirements of an ATX chassis while being very portable.
Even if the components may seem packed within, I enjoy the excellent ventilation inside the case. You can just use a suitable air cooler or water cooler to speed up the airflow, so yes.
You’re in good hands with the cooler master! I’m still amazed that this case can accommodate up to three GPUs. This is ideal for both gamers and developers, since both utilize the GPU heavily, thus there are no more sacrifices on GPU power!
According to the specifications, the case can easily accommodate up to 7 fans (92mm and 120mm fans are already included), a cooler up to 155mm, and radiators up to 280mm in diameter. The GPU must be between these dimensions: 330mm in length and 156mm in width.
Furthermore, all exterior panels and mounted fans are fastened with pins that may be simply removed; therefore, no tools or equipment are required to dismantle your PC case. This is also combined with high-end grade material, ensuring long-term durability. Last but not least, the case is also tiny DTX compatible.
Specifications
- Colors include black and white.
- Steel, plastic, and mesh were utilized.
- 18.25-liter capacity
- Mini DTX and Mini ITX motherboards are supported.
- 3 expansion slots
- SFX or SFX-L power supply
Core P1 by Thermaltake (The best open-air mini ITX case)
Do you want to take it a step further? The Thermaltake Core P1 enables you to do the same, allowing customers to mount it on the wall. Isn’t it incredible? Consider having your PC case placed directly in front of your eyes as you play. To be honest, what a beautiful sight!
In terms of ventilation, the Core p1 is a bit different as well. Because the casing opens from the sides, the airflow is unrestricted 24 hours a day, seven days a week. Furthermore, the glass panel enhances the case’s appearance, making it completely pleasing to the sight.
It’s worth noting that this enclosure allows you to install DIY liquid coolers in either a horizontal or vertical orientation. Aside from that, the case is tailored to those who like being creative. Why? It’s due to the case’s do-it-yourself character. This means you may now customize your PC case to your liking and add aesthetics till your eyes are pleased.
In addition, the Core p1 comes with all of the modular panels, racks, brackets, pre-designed mounting arrays, and a lot of screws to keep your components from being screwed up.
Furthermore, the Thermaltake Core p1 comes with a riser connection that allows you to position your CPU and GPU in whatever direction you choose. Essentially, the case represents the epitome of liberty. You may select the orientation of your motherboard as long as it does not protrude from the casing. Overall, this PC case is aimed towards DIY enthusiasts who like to play around with their computer case.
Specifications
- 9.5 kg in weight
- Color: black
- Glass that has been tempered
- Left-side fan support
- The GPU has a height of 170mm (MAX)
- 180mm long power supply (MAX)
Core V1 SPCC by Thermaltake (The best budget mini ITX case)
The Thermaltake Core V1 SPCC PC case is the next in line, and it’s one of the most cost-effective options thus far. First and foremost, this PC case allows you to experiment with panels. In other words, you may practically unbox your PC case from any angle and manipulate the components as needed.
For what it’s worth, the Thermaltake Core V1 SPCC has a detachable PSU dust filter and adjustable shockproof rubbers to protect the user from electrical discharges.
Aside from that, the panel has a built-in twin USB 3.0 pair with HD audio connections. In addition, the box offers adequate room for 4 data storage devices, modular drive racks, a twin expansion slot, and a VGA up to 260mm in length. Isn’t this incredible?
Furthermore, customers may install a CPU cooler up to 140mm in diameter while still leaving approximately 80mm for connections. You also don’t have to worry about the case’s trustworthiness since it’s Tt LCS approved, which means you can count on the brand to provide top-notch airflow and component slotting performance.
Specifications
- 2 spaces for expansion
- PS2 power supply standard
- 2 USB 3.0 ports, 1 HD Audio port
- Window that is transparent (side panels interchangeable)
- Black on the outside and inside.
- SPCC is the material used in this project.
RVZ02B by SilverStone (The best slim mini ITX case)
If the tiny ITX form factor wasn’t enough for you, then how about a thin and compact combination? Yes, you read it correctly! The SilverStone RVZ02B is a PC case that prioritizes mobility above anything else.
Not to mention, the side panel is pierced with small see-through cuboids that help in dispersing heat out of the case, thus this PC case may provide a booming performance in terms of ventilation.
Furthermore, a GPU with a length of up to 13 inches (330mm) may be installed. If you’re a die-hard gamer who wants to maximize in-game settings, this makes RTX GPUs a no-brainer.
Aside from that, you can only use an SFX power supply, so yes. Please keep this in mind when you finalize your product. Furthermore, the casing is supported by a tool-free drive cage design, which makes it attractive and appropriate for what it provides.
Do you understand what makes this case unique and why you should pursue it? In this scenario, you may set up your system in the following ways: a). Vertical b).Orientation is horizontal.
Specifications
- GPUs with a 13″ length
- Compatible with SFX PSU
- CPU coolers with a height of up to 2.3″
- Vents for passive exhaust
- 2 USB 3.0 ports, 1 audio port, and 1 microphone port
- Weight ranges from 3.2 to 3.3 kg.
Thermaltake F1 Mini ITX Suppressor (The best cube-shaped mini ITX case)
Thermaltake silencer F1 wins the best cube-shaped small ITX case award for its form and size. Believe me, it’s a fantastic case for good airflow!
Furthermore, the panels are detachable, allowing the user access from any side. Simply detach the pins and bingo, your components will fit in from the rear, front, and left.
The Thermaltake Suppressor F1 Mini ITX, on the other hand, is split into two primary chambers. You may place your key components, such as the GPU and CPU, in both the top and lower chambers for better cooling.
Well, the bottom chamber is also devoted to cable management, so the aesthetics are maintained, and you can now show off your PC to your friends without fear of being mocked for bad wire management.
Last but not least, the Thermaltake Suppressor F1 small comes with convenient I/O ports. USB 3.0, HD audio connections, power, and a reset button are all included on the I/O panel. This guarantees that the button density on the outside of your PC case is kept to a minimum.
Specifications
- Up to three supporters may be accommodated.
- GPUs with a length of up to 11.2″
- CPU coolers with a height of up to 5.5″
- 3.2 kg
- Windows that are transparent (panels)
- Cooling of the front intake
- 2 expansion slots
Mini ITX Tower IN WIN A1 Plus White (The best white mini ITX case)
Yes, the IN WIN A1 Plus is a costly entry – it costs much more than the norm. However, if it is aesthetics that are most important to you, the price tag should be the last thing on your mind.
It’s one of the finest white small ITX cases on the market right now, with a plethora of RGB choices at your disposal. In this scenario, addressable RGB lighting may be simply installed and the patterns tweaked to your liking.
Furthermore, the case comes with Sirius Loop ASL120 Fans, so you won’t have to purchase any new ones for air cooling.
Aside from that, the case has a 10-watt charging panel slot that can be used to charge a variety of gadgets. Don’t worry; I’ll get to it in the next paragraph. Also, the IN WIN 650 gold-rated PSU is preferable since it works well with the case (which is already included inside) — as the manufacturer recommends.
Furthermore, the charging panel allows you to charge your gaming devices without difficulty. Because the charging panel is wireless, all you have to do is place your gaming device on top of it to start charging.
Specifications
- 2 PCI-E slots
- VGA card with a maximum length of 320mm
- CPU heatsinks may reach a height of 160mm.
- 2 USB 3.0 ports
- HD Audio
- The materials utilized are SECC and tempered glass.
- PSU integrated in WIN 650
SG05-LITE by SilverStone (The best alternative budget mini ITX case)
The SilverStone SG05-LITE is a fantastic PC case that won’t break the bank. It’s a totally cost-effective choice for individuals seeking to put up a gaming system on a tight budget.
The SilverStone SG05-LITE, for what it’s worth, has adequate room for CPU cooling (82mm in height). Not only that, but you’ll also notice a unique raised dedicated motherboard location (so you can easily slot in components).
Aside from that, the PC case is compatible with mini-DTX and mini-ITX motherboards, so there’s that. You may also install 120mm intake fans to help with air conditioning and temperature control.
The top and side panels, which feature see-through apertures, regulate the airflow. This ensures that the components have adequate space to breathe and also serves as a viewing glass for the RGB lights.
Finally, the SG05- LITE has up to two USB 3.0 ports as well as audio jacks for connection.
Specifications
- CPU coolers with a height of up to 3.2″
- GPUs with a length of up to 10.0″
- 2 USB 3.0 ports
- 1 x audio
- MIC x 1
- Standard SFX PSU may be used as an alternative.
- 2.3 kg in weight
Ultra Compact Mini ITX SilverStone technology (The best Ultra-compact mini ITX case)
The SilverStone technology Ultra Compact Mini ITX is a case that satisfies people’s requirements by providing a plethora of high-end features. First and foremost, the case has a USB Type-C front port, allowing users to have a fantastic gaming experience by using the most up-to-date connections.
Furthermore, the case can accommodate standard-length expansion cards (10.6 inches) as well as Mini-DTX/Mini-ITX motherboards. This is a positive since it now allows you to utilize the DTX form factor with this case.
Apart from that, the SilverStone Mini ITX supports 2.5″ and 3.5″ hard drives and is compatible with ATX power supplies. The motherboard and rear components have their own raised area. If you’re searching for a portable and small masterpiece, this PSU case is a must-have.
Specifications
- Connectivity is provided via Type-C version ports.
- A USB 3.0 version is also available.
- Mini-ITX and DTX are both supported.
- Vents that are too big (Side and Top)
- The maximum height of a CPU cooler is 61mm.
- 150mm in length and weight
Last Thoughts
For what it’s worth, we’ve thoroughly vetted and selected these incredible submissions for our other readers. In the comments section, you may always ask us anything.
Our suggestions will undoubtedly appeal to you. I’ll also throw in my two cents on the three best cases for your gaming system:
- NZXT H200i: If you want flexibility as a major component of your gaming system, the NZXT H200i will not let you down.
- Short on cash? Try the Thermaltake Core V1 SPCC. The Thermaltake Core V1 SPCC will provide you with all of the high-end features at a reasonable price, so look no further.
- WANT AESTHETICS WITH YOUR WIN A1 PLUS White Mini ITX Tower? It is, without a doubt, the most attractive example on the list. If you like white-colored systems, go ahead!
It’s the most wonderful time of the year! As the temperature drops, most of us are thinking about getting cozy inside with some warm, cuddly Furby, or maybe the new Kindle! This doesn’t mean you have to give up your favorite video games though. If you are looking for a new case for your favorite small form factor PC, you might be interested in our list of the best cases for Mini ITX motherboards, or our top picks for the best Mini ITX cases.. Read more about budget itx case and let us know what you think.
