Get The Same Sensitivity in All Games [4 Easy Steps in 2021]

Gamers need to be able to consistently play games with the most fluid, responsive, and accurate feeling. The greater the latency between the controller and the game, the less fluent and less satisfying gaming becomes. That’s why I’ve been researching and designing ways to increase the accuracy and smoothness of the signal between the controller and the game.

A gamepad designed for the 21st century.

Over the years, new-generation consoles have tried to copy the hardware specs of the previous generation’s consoles. This usually leads to a large boost in specs, but also leads to new problems, especially with the controller.

Nothing irritates me more than dealing with varying levels of sensitivity in various games.

It is, without a doubt, a major impediment to your professional gaming.

Fortunately, you can adjust the sensitivity of many games.

So, how do you achieve the same level of sensitivity across all games?

To ensure that all games have the same sensitivity, deactivate mouse acceleration in Windows settings, alter the pointer speed, then manually adjust the sensitivity in each game to match.

Read the whole article because I’m going to show you how the sensitivity of all games, including GTA V, Fortnite, Valorant, and others, alters.

Also, check out our separate article on how to adjust mouse acceleration in FPS games if you want to improve your shooting experience.

Why Is It Necessary To Use The Same Sensitivity Across All Games?

To have a fantastic playing experience across titles and avoid missed shots or improper movements, you’ll need the same sensitivity on all of them.

If you play a lot of games, particularly FPS titles, switching between them will quickly become a pain.

In one game, you’ll do better, but in another, you’ll be completely exhausted. And you may be wondering why this is happening.

The main and most important cause is the variation in sensitivity across games.

Because mouse sensitivities vary across games, you’ll have to move your mouse at various distances to accomplish the same movement.

When you initially start a new game, you’ll see this. On the new game, you won’t be able to move or shoot as you would anticipate.

This is because your muscle memory attempts to transfer the palm motions from your main game to all of your other games. However, since the sensitivity varies, the outcomes vary.

As you continue to play, you will experience an increasing number of missed shots and bad aim. Here’s how to repair it if you can’t hear anybody of discord.

Overall, unless you alter the sensitivity every time you play a new game, you’re going to have an unpleasant experience.

As a result, you’ll need to sit down and set the sensitivities for all of the games you play regularly so that your motions and aim are constant.

How To Achieve Consistent Sensitivity Across All Games

It will only take you a little time to resolve the problem and begin playing like a pro.

To obtain the same sensitivity across all games, follow these steps:

1. Disable the Mouse Acceleration feature.

The on-screen pointer in Windows may move depending on the speed of your mouse movement rather than the distance it travels thanks to a built-in feature.

Even if you have properly adjusted all of the sensitivity levels, keeping it on will result in variable movement.

To disable mouse acceleration, follow these steps:

1. To get started, go to the Control Panel.
2. Hardware and Sounds should be chosen.
3. To locate the mouse settings, go to Devices and Printers.
4. Select the Pointer Options tab from the drop-down menu.
5. Uncheck the box next to “Enhance Pointer Precision.”
6. To save your changes, click Apply.

Now that you’ve disabled mouse acceleration, you should also adjust the pointer speed to ensure that everything is in sync. Also, learn how to set your display to 144hz.

2. Modify the speed of the mouse pointer

Pointer speed is a Windows option that controls the cursor speed in relation to mouse movement. To get the best consistent experience, you should set it to 6.

To alter the speed of the mouse cursor, follow these steps:

1. Go to the Pointer Options menu from the control panel > Hardware and Sounds > Device and Printer > Pointer Options.
2. Set the pointer speed to 6 out of 11 on the dial.
3. To save your changes, click Apply.

3. On the main game, set your optimum sensitivity settings.

At this point, you’ll have to rely on trial and error to find the optimum sensitivity settings for the primary game you’re playing.

Try shooting, targeting, maneuvering your character, and adjusting the sensitivity levels one by one in training mode or single-player mode.

Once you’re happy with your sensitivity, calculate the distance your mouse must travel to accomplish a 360-degree rotation. Learn how to go to the Steam Screenshots folder.

Here’s how to go about it:

1. A ruler should be placed immediately underneath your mouse.
2. Mark the number in the ruler that corresponds to the mouse’s center.
3. To complete a 360° rotation, move your mouse horizontally.
4. Mark the number on the ruler once again so that it lines up with the mouse.

The difference between the two figures is the distance you must travel to complete a full 360° movement in the main game, regardless of whether you chose inches or centimeters.

We’ll now utilize this distance as a starting point for applying the proper parameters to the remaining games.

4. In other games, use the appropriate sensitivity.

It’s time to put the information we gathered in step 3 to work in all of the other games by converting it to your preferred sensitivity. Quickly Check to see whether you have a working power supply.

Follow the steps below to do this:

1. Start a game.
2. Go to single-player mode or the training ground.
3. To complete a 360° movement, measure the distance your mouse travels. If the distance between you and the baseline is larger, you’ll need to raise your sensitivity to match it. If the distance is shorter, the sensitivity must be reduced. You’d eventually discover the right sensitivity after some trial and error, allowing you to move the mouse the same distance to complete a 360° movement.
4. As needed, adjust any further sensitivity settings.
5. Play a few of games to make sure the sensitivity is correct.

Follow the instructions above to play all of your other games.

In the end, your sensitivity will be consistent throughout all games. In all of the games, you may now utilize muscle memory to accomplish the same motions and aim.

What Happens If Your Sensitivity Isn’t The Same For All Games?

If you don’t have the same sensitivity for all of your games, switching between them will become tough.

All games will not have the same level of consistency or playability. If you just play one or two games, you may change the parameters manually each time.

However, maintaining consistency will become more difficult as the number of games you play on a regular basis increases.

Muscle memory will be another problem. Smooth gaming necessitates the use of muscle memory. It enables you to react quickly when you need to. It is what distinguishes an ordinary player from a professional. Here’s a comprehensive tutorial to using Twitch’s host mode.

If you constantly switching games with various sensitivities, your muscle memory will be ruined. Every time you alter the title, your muscles will attempt to adapt to the new parameters.

In every game, how can you find the best sensitivity?

Several factors must be considered while determining the optimum sensitivity in any game.

To begin, disable Windows’ default mouse acceleration settings. You should also maintain the pace of the pointer near the center.

Second, you must determine the DPI with which you are most comfortable. If your mouse supports it, you may adjust the DPI using the specialized DPI button or the program.

You should also think about the surface. Investing in a higher-quality mousepad can save you money in the long term. Movements will be registered differently on different surfaces.

Finally, you’ll want to adjust the sensitivity in-game to find the ideal setting for you.

Some people think that mimicking the sensitivity settings of other professional players is the way to go. But this isn’t completely accurate.

While some of the settings may help you, the majority of them are tailored to that specific individual, and your sensitivity and muscle memory will vary.

As a result, you must ensure that the sensitivity levels are appropriate for you and that you are comfortable with them. To get the ideal sensitivity, you’ll need to play a lot of games and adjust the settings one by one. There is no way around it.

FAQ

Is it beneficial to use the same sensitivity in all games?

Yes, using the same sensitivity in all games is beneficial since it allows you to accomplish consistent gaming across all games by using the same mouse motions.

Is the field of view (FOV) related to sensitivity?

Answer: FOV has no bearing on sensitivity. However, since FOV alters your visual perspective, you may perceive a difference in sensitivity; as a result, some games allow you to select various sensitivity for different FOV.

Is it true that changing one’s sensitivity affects one’s aim?

Answer: Changing the sensitivity of your target will change your aim. Rather of adjusting the sensitivity constantly, it’s better to settle on a level of sensitivity that you’re comfortable with and maintain tweaking it for the greatest accuracy.

Last Thoughts

By no means is it feasible to set the same sensitivity in all games. Anyone can do it with a little patience and trial-and-error.

To have the same sensitivity throughout games, you just need to modify a few simple settings in Windows and in-game.

The best way to describe the G15 Gaming Mouse is by comparing it to another popular gaming peripheral. Let’s say it’s similar to the Logitech G502. The Logitech G502 is a high-end gaming mouse that sells for $80, and it has a $40 price tag. The G15 Gaming Mouse sells for $30, and it has a $10 price tag. There are some key differences though. The G15 has 16,000 DPI and the G502 has 8500 DPI. The G15 also works with PC and Mac, while the G502 only works with PC. If you’ve ever used the G502 and want the same sensitivity in all games, then the G15 is the perfect mouse for. Read more about enlisted sensitivity converter and let us know what you think.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”How do I make my sensitivity the same in all games?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
You can use a program called DS4Windows to make your sensitivity the same across all games.”}},{“@type”:”Question”,”name”:”Should my sensitivity be the same for all games?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
Yes, it is best to have the same sensitivity for all games.”}},{“@type”:”Question”,”name”:”How do you get the same sensitivity in all games Xbox?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”
The Xbox controller has a built-in sensor that allows for the controller to automatically calibrate itself. This means that the sensitivity of each game will be different, but you can change it manually in the settings menu.”}}]}

Frequently Asked Questions

How do I make my sensitivity the same in all games?

You can use a program called DS4Windows to make your sensitivity the same across all games.

Should my sensitivity be the same for all games?

Yes, it is best to have the same sensitivity for all games.

How do you get the same sensitivity in all games Xbox?

The Xbox controller has a built-in sensor that allows for the controller to automatically calibrate itself. This means that the sensitivity of each game will be different, but you can change it manually in the settings menu.