The Lian Li Lancool 205 is one of the best cases on the market for PC enthusiasts. It has a sleek design that offers ample space for storage and cooling, while still being small enough to fit in most modern desktops.
The nzxt h510 review is a top-tier case that has been released by NZXT. It features a tempered glass side panel, and it’s compatible with most ATX motherboards.
The Lancool 205 and NZXT H510 are two of the best mid-towers for creating a stunning system, and from the outside, they seem to be quite similar, making it difficult to pick between them.
Though they seem to be identical, they have some distinct and subtle characteristics that distinguish them in various ways. The following comparison will pit both instances against each other in every category so you can see what you may anticipate from each.
Specs | 205 Lian Li Lancool | NZXT H510 |
---|---|---|
Type | Mid-Tower | Mid-Tower |
Support for motherboards | ATX/M-ATX/Mini-ITX | ATX/M-ATX/Mini-ITX |
Shroud of the PSU | Yes | Yes |
Fan slots | 4 | 5 |
Length of a graphics card | 350mm | 381mm |
Clearance of CPU Cooler | 160mm | 165mm |
Slots for driving | 2″ x 2.5″, 2″ x 3.5″ x 4″ x 2.5″ | 3 x 2.5″, 3 x 3.5″, 3 x 4.5″ |
Dimensions | Dimensions: 205mm x 415mm x 485mm | 428mm x 210mm x 460mm |
Panel on the front | Dual-side-vented | Side-vented |
Fans were among them. | 2x 120mm | 2x 120mm |
Differences
In terms of appearance, there are some variations between the two. Both cases are comparable in size and include a simple, opaque front panel for a clean appearance, as well as side vents. The Lancool 205 has vents on both sides, but they are smaller, while the H510 has vents on one side, but they are almost equivalent in number to the total vents on both sides of the Lancool 205.
These cases aren’t designed for high airflow, and they’re not suggested for severe overclocking or enthusiast-level cooling, but they’ll suffice for the majority of PC users. Another difference is clearance, with the NZXT H510 having greater room than the Lancool 205 for both the CPU cooler and graphics card.
On the other hand, cable management is excellent in both, and they utilize a similar method to conceal the wires from the front by using a cover rather than separate routing holes.
The Lancool II can be equipped with one 120mm rear fan, two 120/140mm fans at the top and front, while the NZXT H510 can only handle one 120/140mm fan at the top.
Pricing and suggestions
While both cases have similar characteristics such as ventilation, component support, and cable management, the Lancool 205 costs much more than the H510, at approximately $120-$130, while the H510 costs just $70-$80, making it a superior price and value case.
205 Lian Li Lancool
Supports ATX, M-ATX, and Mini-ITX motherboards are available. 2x 2.5′′, 2x 3.5′′ storage drive slots Full-length PSU shroud Front panel with dual-sided vents 2x 120mm non-RGB fans pre-installed
NZXT H510
Supports ATX, M-ATX, and Mini-ITX motherboards are available. 3x 2.5′′, 3x 3.5′′ storage drive slots Full-length PSU shroud Front panel with one-sided venting Pre-installed non-RGB 120mm fans
– Lancool II Mesh vs. Lian Li Lancool II
this advertisement should be reported
The nzxt h510 reddit is a comparison between the Lian Li Lancool 205 and the NZXT H510.
Related Tags
- meshify c
- nzxt h510 vs lancool 215
- lian li 205 reddit
- lancool 215 vs 205
- lian li 205 fans